Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
NOTES - IMPORTANT
Does NOT
fit 2-door models.
2012-up models require exhaust modifications to clear the front driveshaft. (#1030) - Available below or here
if using stock wheels 1.5in wheel spacers are required.
On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
SPECS
More Information
Est. Install Time
4-6 hours
Recommended Tire Size
35x12.50 R17
Recommended Wheel Backspacing
4.5" - 4.75"
IN THE BOX
FRONT
Lifted coil springs
Track bar drop bracket
Pitman arm
Brake line relocation brackets
Shock relocation brackets
Cam bolts
Hardware
REAR
Lifted coil springs
Extended sway-bar links
Coil correction plates
Track bar drop bracket
Brake line relocation brackets
Hardware
SHOCKS
(4) Premium N3 Series
*IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CALL OUR STORE AT (602)293-3919