FEATURES:

• Unmatched ground clearance due to high clearance crossmember design.
• 100% precision laser cut materials used in latest computer aided design process.
• Levels the front with the rear of the vehicle
• Will work with factory 18-inch or larger wheels.
• Requires no modification to the stock differential mounts, drivetrain or exhaust.
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

NOTES-IMPORTANT

• Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
• Cutting and drilling is required.
• Does NOT fit Pro Series models.
• On TRD models equipped with a red rear sway bar it must be removed for installation.
• Does NOT fit XSP-X models.
• Requires 18-inch or larger wheels.
• Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
• In some cases minor trimming may be needed to clear 35-inch tires.
• On vehicles equipped with a two-piece driveshaft there is the potential for takeoff vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.

VEHICLE FITMENT:

IN THE BOX

FRONT